AQL 30000 KTTM - SCALE, SLUDGE AND CORROSION INHIBITOR FOR COOLING TOWERS WITH STRESSED WATER CONDITIONS

BENEFITS: AQL 30000 KT is specially formulated to inhibit the formation of hard water scale and control corrosion of ferrous and nonferrous metals in open recirculating cooling tower systems.  The ingredients in AQL 30000 KT are resistant to chlorine and bromine type biocides.  It will treat water having high hardness or high alkalinity. Contains molybdenum tracer for ease in testing.

DESCRIPTION: Featuring a unique multi-polymer formulation that prevents scale formation, AQL 30000 KT also contains dispersants and corrosion inhibitors.
 
APPLICATIONS: AQL 30000 KT has application in large and medium sized refrigeration type recirculating cooling systems with extreme hardness and alkalinity
Contents (stressed water).  This product has application in high-temperature industrial process cooling systems.

INITIAL DOSAGE: Add sufficient AQL 30000 KT to maintain 2-5ppm of molybdenum as measured by Low-Range Molybdenum Test Kit.

MAINTENANCE DOSAGE: Add sufficient AQL 30000 KT to maintain 2-5ppm of molybdenum using a Low-Range Molybdenum Test Kit.  Consult your AQUALINE water treatment consultant for further instructions.

METHOD OF FEED: AQL 30000 KT can be fed directly into the cooling tower sump or directly into the recirculating water line using a midstream injection tip.  This product should not be mixed with biocides in a chemical feed solution.

SYSTEM OPERATING PARAMETERS: Follow the parameters outlined for internal boiler water treatment.
REFRIGERATION COOLING TOWER SYSTEM

Cooling water conductivity : 3500 micromhos (max)
Total hardness : 900 ppm or
Total alkalinity : 600 ppm
Silica as SiO2 (Theoretical) : 150 ppm

HIGH TEMPERATURE INDUSTRIAL PROCESS

Cooling water conductivity : 3500 micromhos (max)
Total hardness : 700 ppm or
Total alkalinity : 500 ppm
Silica as SiO2 (Theoretical) : 150 ppm
PRODUCT CONTROL PARAMETERS: Add sufficient treatment to maintain 2-5ppm molybdenum

PHYSICAL PROPERTIES:

Appearance : Amber
pH : 11.8
Specific gravity : 1.130
Density : 9.43 lbs. /gal.

WARNING
MAY CAUSE SKIN OR EYE IRRITATION
MAY CAUSE ALLERGIC RESPIRATORY REACTION
MAY CAUSE IRRITATION IF INHALED
MAY BE HARMFUL IF SWALLOWED

Contains the Potassium salt of Tolytriazole.  Avoid contact with skin, eyes and clothing.  Wear neoprene rubber or nitrile gloves, chemical goggles and protective clothing when handling.  Wash thoroughly after handling.  Keep the container closed when not in use.  Avoid breathing the mist.  Use sufficient ventilation to prevent a buildup of mist.  Swallowing may cause nausea, vomiting and diarrhea.

FIRST AID:

FOR SKIN CONTACT:  Wash affected areas with large amounts of soap and water for 15 minutes. Remove contaminated clothing and shoes.  Get immediate medical attention.  Wash clothing and clean shoes before reuse.

FOR EYE CONTACT: Immediately rinse the eyes with water.  Remove any contact lenses.  Hold the eyelids apart to ensure rinsing of the entire surface of the eyes and lids with water.  Continue flushing for at least 15 minutes.  Get immediate medical attention.

IF INHALED: Remove from the area to fresh air.  Seek medical attention if respiratory irritation develops or if breathing difficult.

IF SWALLOWED: Give 3 to 4 glasses of water, but DO NOT induce vomiting.  If vomiting occurs, give fluids again.  Get immediate medical attention if discomfort occurs..

KEEP OUT OF THE REACH OF CHILDREN

See the Material Safety Data Sheet for more information.

For medical or environmental emergencies, call 044-26257499.

 
   
  MATERIAL SAFETY DATA SHEET – AQL 30000 KT